You are searching about Inserting A New Gas Line Inside An Old Gas Line, today we will share with you article about Inserting A New Gas Line Inside An Old Gas Line was compiled and edited by our team from many sources on the internet. Hope this article on the topic Inserting A New Gas Line Inside An Old Gas Line is useful to you.

10 Phases of Swimming Pool Construction

Building an indoor pool is the culmination of 10 different stages of pool construction. This article will give you a brief understanding of the build cycle. And it all starts with the desire to have a pool in your backyard.

Design & Engineering

The first place most homeowners look for qualified pool contractors is the local phone book, and word of mouth from others who have built a pool. After the initial interview process, you will have a good idea of ​​how much it will cost to build your pool. The contractor or consultant will provide a complete design and bid for your acceptance. With a contract in hand, the contractor will obtain all necessary engineering from a qualified structural engineer. The contractor will then submit for a permit from the local jurisdiction. At this point, it may also be necessary for the contractor to apply for Home Owners Association (HOA) approval depending on the requirements of your local community. Once the building permit is obtained, construction begins at high speed.

Layout & Drilling

This is one of the most exciting stages of pool construction, digging. Excavation is the digging and forming of the pool. The first thing excavation crews do is pregrade. Pregrade is cleaning the pool site and grading the area for the pool. This allows the crew to paint on the ground the final shape of your pool and at the same time the crew will set the perimeter of the pool and add forms for the structure of the pool. The typical time required to dig a pool depends on various factors. These factors include: access, ground conditions, and the overall size and depth of the pool. Most pools these days are dug in 1 to 2 days.

Rough Plumbing and Electrical

Once the pool is dug, it’s time to move on to the plumbing and electrical. This is where all the trenches will be opened for all the pipes and ducts needed to run your pool. Sometimes, the rough plumbing and electrical will break down in some parts, otherwise all the ductwork and pipe and duct installation will be done at the same time. This includes installing suction and return lines, water feature lines, vacuum lines, fill lines, solar inlet and return, pool heater gas lines and future grills and fireplaces, and service line electrical. In most cases this will take 2-3 days to complete, and can be done either before, during or after the steel.

Steel

The steel stage is the addition of formed reinforcement to the final shape of the pool. A rebar contractor will “tie” the steel using retaining wires in a grid pattern determined by the structural engineer. A good crew will normally take less than a day to tie the steel depending on the size, shape and any raised walls or tie beams.

Gunite or Shotcrete

By this time, your backyard will look like one big disaster area, with trenches running here and there and a big hole in your yard with a criss-cross pattern of rebar running through it. Gunite or Shotcrete is the application of concrete to the surface of the pool, it makes the shell of your pool. Crews will arrive and via a hose will apply concrete to the bottom, the pool will have a close-up view. The set stock, walls and pool floor will be completed. This will also be one of the first times you will be asked to be actively involved in building your pool. For the next 7 to 10 days, you will be required to soak the pool shell two and three times a day with water to help cure the gunite or iron. You will really be surprised how much water the pool structure absorbs.

Tile & Rock

After the gunite or concrete is installed, the waterline tile and any rocks or stones will be placed in your pool. The plate is necessary to provide an easy-to-keep-clean surface at the waterline. Rock or stones are added to incorporate a natural “swimming hole” look and feel and for waterfalls and jumping rocks. For pools with a contemporary look or classic style, tiles are included in the design and applied not only to the waterline, but also to any raised wall or water feature.

decoration

(Concrete, Pavers, Trex, Tile, Stone, etc.) With the tile installed, the next addition to your pool project is decking. Now where I grew up, decking was always associated with wood and redwood was king. But when I got involved in the pool industry, the deck was the item that surrounded the pool. For most pool owners, the deck of choice is concrete. Concrete is durable and inexpensive when compared to other options, grass or landscaping, tile, stone, pavers, and natural or synthetic wood products. Decking installation requires a minimum of several days to form and finish, or may require several days to weeks depending on the surface. The deck crew will also be responsible for installing the equipment block, where all the pumps, filters, heaters and other equipment needed to run your pool will be located.

The set of equipment

Excitement builds, you are almost ready and ready to swim. In the equipment group, either your pool service company or the plumbing and electrical company will return to install all the equipment. Lights will be installed, control panels will be connected, all pumps, heater and filter will be mounted on the equipment table and hydrauliced. This is usually performed routinely within one to two days. All ready to fill your pool with water. But wait, we’re missing the all-important pool area.

plaster

Plaster provides the waterproofing surface for your pool. Plaster comes in many different forms from plain old surfaces to pebbled and polished surfaces. Typically, this can be done within a day. And for those of you where money is no object, that could be an all-tiled pool surface complete with Grecian borders. After the pool finish has been applied, it is now time to start filling your pool.

Clearing and construction start

Once most of the construction is complete, all excess and leftover materials will be removed from the pool site. All the empty boxes will be hauled to landfills and finally, your backyard will be ready to enjoy and not look like a disaster zone. The last thing left to do is open the pool. The start-up process ensures that all equipment is working and the pool has all the necessary chemicals to prevent algae and other problems. Now it’s your turn to start reaping all the benefits of pool ownership.

This has been a short article describing the inground pool process for gunite or shotcrete pools. A pool is the culmination of many individuals, each a seasoned veteran in his or her profession. For most homeowners, a licensed contractor can guide them through the process. For others, the option to build their own pool and act as their general contractor can save them thousands of dollars, but it requires a deeper level of understanding.

Video about Inserting A New Gas Line Inside An Old Gas Line

You can see more content about Inserting A New Gas Line Inside An Old Gas Line on our youtube channel: Click Here

Question about Inserting A New Gas Line Inside An Old Gas Line

If you have any questions about Inserting A New Gas Line Inside An Old Gas Line, please let us know, all your questions or suggestions will help us improve in the following articles!

The article Inserting A New Gas Line Inside An Old Gas Line was compiled by me and my team from many sources. If you find the article Inserting A New Gas Line Inside An Old Gas Line helpful to you, please support the team Like or Share!

Rate Articles Inserting A New Gas Line Inside An Old Gas Line

Rate: 4-5 stars
Ratings: 3592
Views: 92527253

Search keywords Inserting A New Gas Line Inside An Old Gas Line

Inserting A New Gas Line Inside An Old Gas Line
way Inserting A New Gas Line Inside An Old Gas Line
tutorial Inserting A New Gas Line Inside An Old Gas Line
Inserting A New Gas Line Inside An Old Gas Line free
#Phases #Swimming #Pool #Construction

Source: https://ezinearticles.com/?10-Phases-of-Swimming-Pool-Construction&id=715571